In addition to appearing as lifelike as possible, a denture must also possess the properties required to withstand the complex and demanding conditions of the oral cavity. With constant chewing forces, moisture, temperature fluctuations, pH changes, and one of the largest and most diverse microbial ecosystem, it is one of the harshest environments in the human body. Understanding the core mechanical and chemical properties of the materials used for making dentures will help you effectively design prostheses that are reliable, durable, and biocompatible for years to come.

Because these properties directly influence clinical performance, they must be measured using standardised testing methods. For predictable long-term performance, denture base polymers are tested according to standards set by the International Organization for Standardization, particularly ISO 20795-1:2013 for denture base materials.

This blog aims to explain some important values in simple terms, along with their relevance for laboratory work. 

Fracture toughness

Fracture toughness is a measure of the ability of a material to resist the growth of existing cracks under stress without breaking. Imagine a small crack already present in a denture base. How well the denture material can prevent this crack from spreading further is its fracture toughness. In the oral environment, denture plastics are subjected to repeated and varied stresses: cyclic bending during mastication, impact forces if a prosthesis is dropped, thermal expansion and contraction from hot and cold foods, and long-term fatigue loading. Under these conditions, a material with low fracture toughness allows a small crack to propagate quickly, often resulting in a sudden and complete fracture. 

A material with high fracture toughness, on the other hand, behaves differently. Even if a microcrack is present, the material can absorb and redistribute stress around the defect. This drastically lowers the likelihood of fractures. 

According to ISO standards, materials with high impact resistance are required to achieve a maximum stress intensity factor of ≥ 1.9 MPa·m¹ᐟ² and a total fracture work of 900 J/m².

Clinical relevance

For dental professionals, high fracture toughness manifests as greater reliability of prostheses and restorations in everyday practice. For patients, this means improved safety, fewer repairs and longer service life of the prosthesis.

Flexural strength

Flexural strength, also known as bending strength, indicates how much bending stress a material can withstand before it breaks.

During chewing, dentures are subjected to bending forces. If the dental plastic is too brittle, it will snap immediately. If it’s too flexible, it will bend too much and deform. Deformation of a denture base can make a denture lose its suction or border seal and become loose and uncomfortable. 
 
ISO 20795-1:2013 specifies minimum flexural strength values for denture base polymers  to commonly be at least 60 MPa, depending on material type.

Did you know?

If you start to bend a plastic ruler with your hands, how hard you’re going to be able to bend it before the ruler snaps in half is the flexural strength of the plastic ruler. It is a measure of how much force a material is fighting against while it’s being pushed out of its original shape.

Flexural modulus

How much a material bends or deforms before it reaches its breaking point is known as flexural modulus. In simpler terms, it measures the rigidity or stiffness of a material.

A material with high flexural modulus resists deformation and maintains its original shape under pressure. If the flexural modulus is too low:
  • The denture flexes repeatedly.
  • Fatigue cracks develop over time.
  • Fit and occlusion may be compromised.
If the flexural modulus is too high and fracture toughness and strength are inadequate:
  • Stress concentrates at weak points.
  • Sudden fracture becomes more likely.
A denture base should be stiff enough to maintain its structural integrity, yet strong enough to resist breakage under repeated stresses. An equilibrium between stiffness and strength is what guarantees long-term durability, patient comfort, and predictable laboratory outcomes.
 
According to ISO standards, the ideal flexural modulus of a denture base material sits in the range of 1,500-3,000 MPa (2-3 GPa), depending on material type. It is important to note that this must be paired with a flexural strength of at least 60 MPa (preferably higher) to prevent fractures.

Did you know?

While flexural strength tells us when a material will break, the flexural modulus tells us how much it will bend before that happens.

Clinical relevance

For dental professionals, flexural modulus is an important indicator of dimensional stability. A high modulus ensures that the fine details of the master cast and thus the fit in the patient's mouth are maintained even under heavy masticatory forces.

Residual monomer (MMA)
Residual monomer is the unreacted methyl methacrylate (MMA) liquid left in the denture base after polymerisation is complete. 
How does residual monomer (unreacted MMA) affect a denture?
The residual MMA acts as a ‘plasticiser’ by reducing the forces between the polymer chains and thus weakening the internal structure of the material. This could reduce the flexural strength, hardness, and stiffness of the denture, making it more likely to warp or break under heavy chewing loads.
Excessive residual monomer can leave behind microscopic voids. These microscopic voids in the denture can increase the water solubility and water absorption of the denture (discussed below), which can reduce its dimensional stability over time.
According to ISO standards, the residual methyl methacrylate monomer must not exceed 4.5% for self-cured materials and 2.2% for heat-cured materials and (all other types).
Biological effects of monomer leaching
  • Microbial adhesion: The microscopic voids of acrylic with too much monomer can encourage the adhesion of microorganisms like Candida albicans and Staphylococcus aureus. If left unnoticed, this can lead to denture stomatitis. 
  • Tissue irritation and allergic reaction: The monomer can easily diffuse out of the denture into adjacent oral tissues and cause inflammation. It may also trigger allergic reactions that often cause a severe ‘burning’ sensation.

Hence, the lower the residual monomer content, the better the mechanical properties of the material, compatibility and, most importantly, patient safety. 

Water absorption
Water absorption is the process by which plastics absorb water. 
What causes water absorption?
Denture bases are made of a polymer (PMMA). On a molecular level, it has tiny gaps between its long chain-like molecules. Water molecules are polar, meaning they have an uneven distribution of charge within the moelcule. The polymer chains in the denture also have polar spots which can interact with the polar water molecules. These interactions attract water molecules into the microscopic spaces between the polymer chains, a process known as sorption. 
Effects of water absorption on denture hygiene and stability
The alternating absorption and drying of denture base materials leads to internal stresses within the materials and, consequently, to material fatigue. This results in significant dimensional changes. Water diffuses into the material, causing it to gradually expand and increase in volume, which can lead to material degradation.
 
  • Bacterial growth: When water enters the plastic, it pushes the polymer chains apart, creating gaps. These gaps allow microscopic organic matter and bacteria to enter the denture base and begin to colonise. 
  • Dimensional instability: As the plastic absorbs water, it swells up. This volumetric expansion can cause warping and affect the fit, retention, and stability of the denture. While some level of expansion helps compensate for polymerisation shrinkage and improve the fit of the denture, excessive absorption can lead to warping, dimensional instability, and discomfort.
  • Decreased strength: As water can soften the resin, it could reduce its flexural strength, hardness, and wear resistance. 
  • Poor esthetics: Increased water absorption also causes staining and colour instability. 
According to the ISO 20795-1:2013 standard, water absorption should not exceed 32 μg/mm³. Low absorption prevents a significant drop in flexural strength, hardness, and fatigue resistance, and keeps the denture rigid and less likely to snap under chewing forces. It also helps maintain long-term hygiene, and translates to better biocompatibility, dimensional stability, and durability of the denture.
Water solubility
Water solubility measures the mass of substances (like residual monomer, soluble additives, and plasticisers) that leach out from the denture into the patient’s saliva.
Effects of water solubility on the denture
High water solubility decreases the durability of the denture and may also trigger soft tissue reactions (by allowing monomer to leach out). When substances dissolve out, they leave behind microscopic voids, making the denture structurally weaker over time. A soluble denture thus becomes brittle and more prone to snapping. Solubility must therefore be kept as low as possible to prevent the denture from weakening, losing its shape or appearance, and to maintain good biocompatibility. According to ISO standards, the loss in mass per unit volume should not exceed 1.6 μg/mm³ for heat-cured materials and 8.0 μg/mm³ for self-cured materials. A high-quality and thorough polymerisation process can help keep water solubility low.
Abrasion resistance, plaque accumulation and discolouration
Abrasion resistance describes how well a denture material is able to withstand wear caused by brushing, contact with opposing teeth and chewing forces. When a material has low abrasion resistance, denture surfaces scratch easily, developing microscopic grooves that promote bacteria and plaque accumulation, and make the denture more susceptible to stains, discolouration, oral odours, and infections. 
Surface characteristics play an important role in this process. Plaque tends to accumulate quicker and more easily when surface roughness of the denture exceeds 0.2 μm, when porosities are present, or when aggressive cleaning methods damage the surface.
In addition to hygiene concerns, excessive wear can also alter the occlusal morphology of denture teeth. A high abrasion resistance therefore helps preserve the patient’s bite and keeps issues like TMJ pain and facial sagging, which are inevitable with an uneven occlusion, at bay. It also reduces the risk of plaque-related problems like staining, persistent oral odour and infections like denture stomatitis.
The takeaway
Material properties help us understand how a denture is likely to perform over time in the challenging conditions of the oral environment. Mechanical parameters such as flexural strength and flexural modulus indicate how well the denture can resist bending or fracture during chewing, while chemical factors like residual monomer content, water absorption and solubility influence biocompatibility, dimensional stability and long-term durability. Surface characteristics, including resistance to abrasion and plaque retention, are also important for maintaining hygiene and esthetics.
 
Because these properties are so closely interconnected, the aim is not to maximise a single value but to achieve a balanced material profile that meets ISO requirements and performs reliably in everyday use.

The following might also be of interest to you