With its integrated technology[1] the Programat® CS6 combines sintering, crystallizing and glazing in a single device and minimizes process times. This means you can focus more on your patients while your chairside restorations are completed quickly and reliably.
Designed for the use in dental practices: Compact. Efficient. Universal.
New opening mechanism
The new, innovative opening mechanism of the Programat CS6 accelerates the predrying process, offering further time savings. With the new opening mechanism, the warm air arising from the firing chamber can be used to dry restorations from underneath.
Specially developed vacuum technology[1]
The integrated vacuum technology[1] accelerates the sintering process in the Programat CS6, while enhancing the esthetics of your zirconia restorations at the same time. Addionally, the vacuum function optimizes the crystallization and glazing process.
Temperature calibration
You have full control over the temperature in the Programat CS6 and achieve consistently reliable results. Temperature calibration can be easily performed on-site in your practice.
Colour touchscreen
Operating the Programat CS6 is quick and straightforward. The modern, full-colour touchscreen is intuitive and durable, making it ideal for use in a dental practice.
LED status display
The Optical Status Display (OSD) located at the furnace base allows you to easily check the current operating status of your furnace. The OSD uses different colours to indicate the progress of the process, giving you a clear overview of key updates at a glance.
Speed-sintering and speed-crystallizing IPS e.max® restorations
IPS e.max® ZirCAD Prime*
Speed-sintering in 15:00 min.[2]
- Zirconium oxide ceramic (ZrO2)
- High-strength material for increased reliability and reduced wall thickness of 0.8 mm
- Esthetic results despite reduced program durations
- Conventional cementation with ZirCAD® Cement
IPS e.max® CAD
Speed-crystallization in 11:10 min.[3]
- Lithium disilicate glass-ceramic (LS2)
- For highest esthetic demands
- Greatest variety of restorations (crowns, inlays, onlays, veneers, bridges, hybrid abutments)
- Survival rate of 97,2% over a 10-year period[4]
- Adhesive cementation with Variolink® Esthetic
The quick and easy route to your IPS e.max restorations
The Programat CS6 is the ideal solution for dental practices that focus on enhancing efficiency and saving space. With its smart, compact design, the furnace seamlessly adapts to your practice's needs without taking up valuable space. Despite its compact design, this multi-use furnace can reach tempertatures of up to 1,560 °C (2,840 °F). Its optimized firing chamber speeds-up the firing cycle, delivering even more esthetic results.
In addition to the pre-installed programs for Ivoclar materials, programs for third-party materials can also be easily set up. No matter which material you choose, the Programat CS6 helps you achieve your goal quickly. The specially developed vacuum technology accelerates the sintering process and optimizes crystallization and glazing. Our VP3 easy and VP5 vacuum pumps are the ideal addition to the Programat CS6.
Learn more about the Technology
* The range of available products may vary from country to country.
[1] External vacuum pump required.
[2] Programat CS6, superspeed sintering in 15 min. without predrying, three crowns. R&D Ivoclar, Schaan.
[3] Programat CS6, superspeed crystallization, 11:10 min., IPS e.max CAD HT, MT, LT, IPS e.max CAD Crystall./Glaze Spray or polishing technique (self glaze), maximum two restorations, R&D Ivoclar, Schaan.
[4] The survival rate of monolithic IPS e.max CAD posterior crowns was evaluated with the Kaplan-Meier method. The failure rate refers to technical failures such as fractures and chipping. R&D Ivoclar, Schaan.