The die:master system provides you with perfect die preparation as a working basis for conventional and all-ceramic restorations.

die:master set
Fast and clear access to all system components due to the set stand.

• A high degree of working comfort due to the integrated isolating brush with magnetic fixture
• Integrated, practical die holder in the stand.

die:master duo
Stone hardener and sealant
In-depth hardness and high edge-strength due to powerfully cross-linked die stone structure.

100% dimensionally-stable die due to 0µm layer thickness

• Maximum bond strength due to chemical bond to die spacer layer

die:master grey, red, blue, silver, gold varnishes
Durable die varnishes with three layer thicknesses

(13, 15 and 20 μm).

• Extremely resistant to steam and scratches due to a highly cross-linked varnish structure
• Maximum bond between varnish and hardener due to the primer technology
• No pools of varnish on the brush or die and a high level of edge stability due to extremely thixotropic flowing characteristics

die:master thinner
For dilution and modification of the die:master varnishes.

• Permanent preservation of layer thickness and varnish quality
• Controlled viscosity adjustment due to accurate droplet dosing

picosep Wax Isolation
Solvent-free, silicone-based plaster against wax isolation.

• No corrosion of varnishes and waxes due to specific coordination of isolating agent with the die:master components.
• No evaporation of the isolating agent due to alcohol-free formula

die:master ivory & die:master aqua
Tooth coloured and removable die varnishes specially for all-ceramic restorations, such as press ceramics made from lithium disilicate (LS2).

die:master ivory – All-ceramic (A2/B2)
Extremely resistant tooth-coloured die varnish.

• Highly aesthetical effect and no colour irritation during the production process due to harmonious colour coordination
• Minimal dimensional increase of only 10 μm per coat
• Extremely high vapour and scratch resistance due to a highly cross-linked varnish structure

die:master aqua – Press ceramic (A1/B1)
Resistant die varnish during the wax-up but also easy to wash off with water.

• Easy handling due to high opacity
• Optimal expansion compensation with a layer thickness of 10 μm per coat of varnish

For more information on Renfert die:master, visit www.renfert.com or contact us on 0508 486 252.