A masterpiece for greater efficiency: IPS e.max® ZirCAD Prime blocks empower you to reach the next level of speed, strength and aesthetics in the production of monolithic zirconia crowns. Faster than ever before: Sinter crowns in just 15 minutes with the Ivoclar Programat® CS6 and achieve reliable and aesthetic results without any loss of strength.[1]
Even faster. Even stronger.
Quickly sinter your restorations in just 15 minutes using a sintering furnace such as the Programat CS6[1].
Robust and enduring: Flexural strength of 1,100 MPa[2] allows you to minimise the wall thickness of crowns to 0.8mm.
Highly aesthetic
Achieve natural-looking and aesthetic results due to the smooth progression of shade and translucency from the dentine (3Y-TZP zirconia material) to the translucent incisal area (5Y-PSZ zirconia material).
Place the restorations with a conventional cement, e.g. ZirCAD® Cement; or use a self-adhesive or adhesive cementation protocol instead.
Speed-sintering zirconia: Your solution for single-visit treatments
A block that combines aesthetics and versatility
Various possibilities for maximum flexibility
Only one free sample per customer.
Don't have an Ivoclar Account? Create an account here.
Terms and conditions: This offer is available only to licensed dental professionals. Each eligible dental professional is entitled to receive one complimentary sample. Changes and possible errors are reserved. The sample is for professional use only and should be used in accordance with the instructions provided. This offer is valid until 31/10/2025 or as long as stocks last. There is no legal claim on receiving a sample. The sample material provided by Ivoclar is intended only for testing purposes. If these products are used on patients, please note that no insurance reimbursement is allowed. For further information, please contact the respective health insurance provider.
IPS e.max® ZirCAD Prime - Chairside workflow with CEREC®**
Increased speed and performance in the CAD/CAM chairside workflow
Get this product in our online shop
[1] Programat CS6, Superspeed sintering in 15 minutes, without predrying, three crowns or CEREC®** SpeedFire 16 minutes, without predrying, two crowns. R&D Ivoclar, Schaan.
[2] Dentin, typical mean value of biaxial flexural strength, R&D Ivoclar, Schaan.
[3] At natural light conditions. The use of artificially generated UV or UV-like light may result in a different impression. Available with the CEREC®** software version 5.2.10 and Programat CS6 software version 2.1., Programat CS4 software version 2.1.
[4] Programat CS6, Superspeed crystallization, 11:10 Minuten, IPS e.max CAD HT, MT, LT, IPS e.max CAD Crystall./Glaze Spray or Self Glaze technique, max. two restorations, R&D Ivoclar, Schaan. Addtional data on file.
[5] The survival rate of monolithic IPS e.max CAD posterior crowns was evaluated with the Kaplan-Meier method. The failure rate refers to technical failures like fracture and chipping, R&D Ivoclar, Schaan.
[6] Hu (2023), Clinical esthetics with IPS e.max ZirCAD Prime on a lower first molar, Test Report, Ivoclar Vivadent, 2023. Data on file. Scientific Report: IPS e.max ZirCAD Prime. Vol. 01/2023.
** CEREC® is not a registered trademark of Ivoclar Vivadent AG.